The Grease Dispenser system is designed for dispensing of medium to high viscosity fluid, Ideal for silicones and grease. It utilizes compressed air as a power source to create the necessary pressure to move the grease from a container or reservoir to the desired location.
The extruder pump body is fitted with a follower plate that seals and follows the material as the level drops to wipe the sides of the pail clean limiting waste. The fluid is pressure-fed by reinforced hoses to a valve that is actuated by a valve controller.
The extruder pump body is fitted with a follower plate that seals and follows the material as the level drops to wipe the sides of the pail clean limiting waste. The fluid is pressure-fed by reinforced hoses to a valve that is actuated by a valve controller.
- This Grease Dispenser will be suitable for medium and High level viscosity Fluid.
It will dispense in the rate of 500cc per minute,
It has both Auto & Manual Mode Dispensing methods.
- Electronics Application: Component assembly , PCB assembly
- Automotive Application: Engine gaskets, seals and lubrication , Battery Sealing
- Manufacturing Application: Potting & filling , Lines
- Aerospace Application & Solar Panel Sealing & Potting:
LED display , led screen , outdoor wall washer , outdoor rigid light , underground lamp , underwater light Micro-electronics, inductors, transformers, ballasts, electronic coils, transformers, relays, loudspeakers, heat kettles, inductors ,auto lamp ,generator, clutch, air conditioner filter, oil filter, car control card, horn, flasher , electric vehicle accessories, Communication box ,Water filter , water meter and so on
| Property | Specifications |
| Model Name / No. | Grease Dispenser/ DP-05 |
| Pail Capacity | 5 kg |
| Cylinder Stroke length/ Pail Height | 300 mm |
| Follower Plate Diameter | 225 mm |
| Flow rate | 500 cc/ min |
| working Mode | Auto/Manual |
| Operating Pattern | Pneumatic |
| working Pressure | 1 to 6 bar (based on material viscosity) |
| Maximum Outlet Pressure | 24 bar |
| Compression ratio | 1:5 |
| Pump outlet connection | 1/2" |
| Working Viscosity | medium to High level Viscosity |
| Dimensions | L= 25" W = 13" H = 60" |
| Weight | 60 kgs |
Related products
.jpeg "Grease Dispensing Pail Extruder - GRD 25")
Write To Us
Learn more about Adofil products and services by sending us queries on a specific application. Contact Adofil by filling out the form below.