The Grease Dispenser system is designed for dispensing of medium to high viscosity fluid, Ideal for silicones and grease. It utilizes compressed air as a power source to create the necessary pressure to move the grease from a container or reservoir to the desired location.
The extruder pump body is fitted with a follower plate that seals and follows the material as the level drops to wipe the sides of the pail clean limiting waste. The fluid is pressure-fed by reinforced hoses to a valve that is actuated by a valve controller.
-
This Grease Dispenser will be suitable for medium and High level viscosity Fluid.
It will dispense in the rate of 500cc per minute,
It has both Auto & Manual Mode Dispensing methods.
- Electronics Application: Component assembly , PCB assembly
- Automotive Application: Engine gaskets, seals and lubrication , Battery Sealing
- Manufacturing Application: Potting & filling , Lines
- Aerospace Application & Solar Panel Sealing & Potting:
LED display , led screen , outdoor wall washer , outdoor rigid light , underground lamp , underwater light Micro-electronics, inductors, transformers, ballasts, electronic coils, transformers, relays, loudspeakers, heat kettles, inductors ,auto lamp ,generator, clutch, air conditioner filter, oil filter, car control card, horn, flasher , electric vehicle accessories, Communication box ,Water filter , water meter and so on
|
Property |
Specifications |
|
Model Name / No. |
Grease Dispenser/ GRD-05 |
|
Pail Capacity |
5 kg |
|
Cylinder Stroke length/ Pail Height |
300 mm |
|
Follower Plate Diameter |
225 mm |
|
Flow rate |
500 cc/ min |
|
working Mode |
Auto/Manual |
|
Operating Pattern |
Pneumatic |
|
working Pressure |
1 to 6 bar (based on material viscosity) |
|
Maximum Outlet Pressure |
24 bar |
|
Compression ratio |
1:5 |
|
Pump outlet connection |
1/2" |
|
Working Viscosity |
medium to High level Viscosity |
|
Dimensions |
L= 25" |
|
Weight |
60 kgs |
.png "Grease Dispensing Pail Extruder - GRD 25")
Write To Us
Learn more about Adofil products and services by sending us queries on a specific application. Contact Adofil by filling out the form below.